Report Copyright Infringement View in OSM UK

Description

Create an Angel from paper or card

Resources

1 sheet of paper or card
glue
string
scissors

Instructions

Cut the piece of paper into strips:
For the wings: Two strips of paper 3/4 inch x 6 inches
For the head: One strip 3/4 inch x 4 inches
For the top of the body: One strip 3/4 inch x 7 inches
For the bottom of the body: One strip 3/4 inch x 3 1/2 inch

or use the template


1. Place glue onto one edge of your 4 inch long strip and glue it into a circle. Set it aside.
2. Make an angel wing by placing some glue on one edge of a 6 inch strip and gluing the other end down on top of it to form a teardrop shape as shown below. Do this for the second wing. Set them aside.
3. To make the angel’s body place glue onto both ends of the 7 inch strip and glue them down onto each end of the 3 1/2 inch strip, forming a bell shape as shown below.
4. Glue the head on top of the body.
5. Glue each wing to the side of the angel. You can have the wings face out, down, or up!
6. Cut a piece of yarn or twine and tie it through the head of the angel to form a loop for hanging.

Tags

(none)

Badge Links

• Skills - Creative